![]() ![]() Add a new Script cue, type (or copy & paste) the following lines in the script and compile it. First, we will turn on the input channels 1-4 while turning off the input channels 5-8. What you can control from QLab By using QLab, you can remotely control the following functions and parameters: Recall Scenes Turn on/off each input channel Set the pan of each input channel (to the Stereo bus) Set the Fader level of each input channel 3ฤก3 Click on the target row, and then click on GO button or hit the space bar, and the target Scene will be recalled Setting input channel on/off, pan and fader levels In addition to recalling Scenes, you can set the on/off statuses, pan levels and the fader levels of the input channels at the same time, or separately. However, this document specifically explains how to run Python scripts on QLab for controlling it. Please note, CL/QL/TF can be also controlled by using Terminal application for sending commands to the console. Introduction This guide describes how CL/QL/TF series is remotely controlled by QLab, the industry standard show control software running on Mac, how to set up and configure the system, and how to use the script templates available on our website. All pictures, graphics and screenshots of QLab are used by courtesy of Figure 53, LLC. Introduction What you can control from QLab Equipment used Downloading the script template Connecting the console and Mac Configuring the IP addresses Configuring the script templates Programming QLab (for CL/QL series) Recalling Scenes Setting input channel on/off, pan and fader levels Programming QLab (for TF series) Recalling Scenes Setting the channel on/off, pan and fader levels of each channel History August 2019 v1.0 released All Yamaha products described in this document are the registered trademarks of Yamaha Corporation. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |